Endoscope Camera Module ManuoFactuerr is mainly used for the diagnosis of natural cavities of the human surface and the natural cavity of the shallow parts and the lesion of the stomach through the stomach.
With the expansion of the range of Endoscope Camera Module ManuoFacturer, doctors using Endoscope Camera Module ManuFactuerr frequencies are getting higher and higher. Endoscope Camera Module ManuoFactuer is a more precious medical device, but as long as it can be used and maintained correctly, it can avoid damage.
1. Endoscope Camera Module Manufacturer should be rinsed up after using it, and the water stains and dry the water. When the front end of the lens is stained, the lens paper, cotton swab or fine gauze are wiped gently.
2. Endoscope Camera Module Manufacturer should have a special counter to keep it in a dedicated packaging box, lined with soft sponge or polyurethane foam.
3. All Endoscope Camera Module Manufacturer and surgical equipment must be coded neatly. Do not cross overlap to ensure that the internal spare mirror and equipment will not hit each other when they are transported.
4. When taking out or put in Endoscope Camera Module Manufacturer, you should hold your hands with both hands and put it lightly. Because the mirror tube of the endoscope is very thin, it will be bent and deformed by squeezing, bumping, bending, and landing, causing the lens damage or the shift of the light shaft and the image is unclear or unavailable. Or when you put in Endoscope Camera Module Manufacturer, you should gently take it out or put in your hands, and you should not mention it.
5. Endoscope Camera Module Manufacturer When moving in a hard container such as a tray, pay attention to the separation with other devices. Do not bump too much to avoid collision into the spare mirror.
6. The inside of the box should be kept in the box to keep the box dry.
7. Some Endoscope Camera Module ManuoFacturer is not resistant to high temperature and high pressure. This is mainly because the epoxy resin glue used in the mirror end will be opened at high temperature and high pressure to cause water in the mirror tube. Therefore, this type of endoscope cannot be used to use high -temperature and high -pressure methods such as boiling and high -pressure steam **.
endoscope camera module manufacturer https://www.hengal-tech.com/p-Camera-Module/4.html
